PhotonIcs and Electromagnetics Research Symposium,
also known as Progress In Electromagnetics Research Symposium
PIERS Proceedings
Published: 2015-08-28
Simulation of Temperature Profile of Soot Preform during Sintering Process
By
Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9,Page(s)403-405
Abstract
Sintering process in optical fiber manufacturing technology densifies the soot pre- form to glass preform which is used for drawing optical fiber. The analysis of temperature profile of the soot preform during sintering has been studied using Computational Fluid Dynam- ics (CFD) simulation software. The temperature profile inside the soot preform is discussed by changing the preform diameter during sintering process.
Citation
Ramesh Behera, and Sham Nagarkar, "Simulation of Temperature Profile of Soot Preform during Sintering Process," Proceedings of 2015 Photonics & Electromagnetics Research Symposium, Prague, July 6 - 9,Page(s)403-405
References

1. Doorwar, S., S. Chakraborty, and S. Neogi, "A multiscale model for quantifying helium diffusion in porous unsintered glass," The Canadian Journal of Chemical Engineering, Vol. 88, April 2010.
doi:10.1002/cjce.20270        Google Scholar

2. Scherer, G. W., "Sintering of low-density glasses: 1. Theory," Journal of the American Ceramic Society, Vol. 60, No. 5-6, May-June 1977.
doi:10.1111/j.1151-2916.1977.tb14114.x        Google Scholar

3. Tandon, P., "Doping of silica during sintering," Journal of Non-Crystalline Solids, Vol. 351, 1466-1472, 2005.
doi:10.1016/j.jnoncrysol.2005.03.019        Google Scholar

4. FLUENT v13.0, Theory Guide and User's Manual, ANSYS Inc..        Google Scholar